CareSilver-XVP

Table of Contents

Overview

This FDA approved film does not stretch due to the orientation of the layers during the lamination process. Great for Food and industrial uses, the film. The outermost layer is PVDC coated PET laminated to a metalized PET producing a lamination structure with enhanced barrier potential. This material is a good choice when the pouch design requires advanced printing techniques such as intricate designs that cannot be diecut into a aluminum foil based film.

Note: The performance of any film will be influenced by a number of factors and testing must always be performed to ensure the film meets the use.

Relative Performance Indications

Oxygen Barrier

Moisture Barrier

Light Barrier

STrength

Heat Resistance

Freezer Storage

Material Data

Here are some of the common indicated properties for this film.

ITEM		UNIT	TEST METHOD	STANDARD
SIZE	WIDTH	200	RULER	±1%
SIZE	LENGTH	200	RULER	±1%
THICKNESS		µ	MICROMETER	120µ
BOND STRENGTH		g/15mm	UNVERSAL TESTER	500↑
SEALING WIDTH		mm	RULER	10
SEALING STRENGTH	SIDE	kg/15mm	UNVERSAL TESTER	6.0↑
SEALING STRENGTH	TOP	kg/15mm	UNVERSAL TESTER	6.0↑
THRUST STRENGTH		N	JAS ST.(FED-STD-101-2065)	OVER84.6
W.V.T.R		g/㎡.24hr	ASTM E96-1980	2.3↓
O.T.R		cc/㎡.24hr	ASTM D1434	0.8↓
TENSILE STRENGTH	(MD)	N/ｍ㎡	ASTM D 882	OVER42.1
TENSILE STRENGTH	(TD)	N/ｍ㎡	ASTM D 882	OVER42.2
	(MD)	%	ASTM D 882	OVER55
	(MD)	%	ASTM D 882	OVER50
	(MD)	N	ASRM D 1938	OVER1.6
	(MD)	N	ASRM D 1938	OVER1.2
COMPRESSIVE STRENGTH		N	JIS Z 0238	80-600
TEMPERATURE TEST			PILOT RETORT TESTER	100℃/30min, 2.2kgf/c㎡

All values indicated regarding film properties or characteristics, were provided by our film supplier and are given as an indication and should be considered as average indicative values. This document is based on our film supplier statements and / or independent lab testing, data from multiple tests, or different film suppliers of the same film family may be combined in the above table. While unexpected, it is possible that the validity of the statements could change without notice.

Environmental Impact

This material is a multi-layer laminated plastic and will typically fall into the check-locally, or store drop off category.

Property	Sample Data
Recyclable	Multi-Layer Check Locally
PCR Option Available	Yes
At Home Compostable	No
Commercial / Industrial Compostable	No

Recyclability and composability varies by jurisdiction. Composability claims are limited by law, and vary by jurisdiction, consult a qualified professional in your state.

Compliance

Compliance is important, and here are CarePac we can support your compliance needs with extensive film supplier and lab testing data.

BPA FREE

FDA Food Approved

PROP 65

Property	Sample Data
CEPE/EuPIA	Manufactured in accordance with
Cal. H&S (25214.16)	Compliant
PFAS - perfluoroalkyl and polyfluoroalkyl § 37-0209, RCW 70A.222.070	Does not knowingly add
Prop 65 (OEHHA)	Does not contain listed substances
SR 817.023.021	Not in excess of overall or specific migration
EU directive 10/2011/ED	Compliant
EU directive 1935/2004	Compliant
FDA 21 CFR 73	Compliant
Cal. H&S (25214.16)	Compliant
RoHS Directive 2011/65/EU	PASS

Compliance information above is derived from lab testing, or film supplier statements. Independent verification is advised, and Lot specific testing available.

Related Materials

PET/VMPET/PE

The plastic material comes in rolls, and this material is then used to create high-quality aluminum bags. If you’ve seen pouches that have a shiny sheen and resemble mylar balloons, then you’re looking at PET VMPET PE printing.

Learn More

KPET/PE

PET is by far an excellent packaging material due to its high oxygen barrier, durability, and heat resistance. It’s also known for being a great laminating substrate. PET coated with PVCD (Polyvinylidene chloride) results in a laminate called KPET or saran coated PET, which offers higher moisture and gas protection.